Working principle of vibrating fluidized bed dryer

The material enters the machine from the inlet, and under the action of the vibration force, the material is thrown forward and continuously in the horizontal direction. The hot air passes through the fluidized bed and the wet material heat exchange, and the humid air is discharged by the cyclone after being removed by the cyclone, and the dry material is discharged from the discharge port.

Vibration fluidized bed dryer features:

1. The material is evenly heated, the heat exchange is sufficient, the drying strength is high, and the energy saving is about 30% than that of the ordinary dryer .

2. The vibration source is driven by vibration motor, which is stable in operation, convenient in maintenance, low in noise and long in life.

3 , fluidization is stable, no dead angle and blow through phenomenon. Bed opening form and opening rate are critical. The final moisture and output can be controlled by the amplitude and the amount of feed.

4 , good adjustability, adapt to the width of the face.

5 , the surface damage to the material is small, can be used for the drying of fragile materials, and the material particles are irregular, and the working effect is not affected. Significantly better than the bubbling bed

6. The fully enclosed structure effectively prevents cross-contamination between materials and air, and the working environment is clean.

Vibration fluidized bed dryer application range

1. Chemical medicine: various tableting granules, xylose, succinic acid, xylitol, mannitol, boric acid, borax, benzenediol, malic acid, maleic acid.

2. Food   Products: alcohol, monosodium glutamate, sugar, casein, chicken, salt, slag, watercress, seeds

3. It can also be used for cooling and humidifying materials.