How to save fuel in tractor farmland

In order to reduce operating costs, it is important to save oil. How to save oil when the tractor is cultivated has the following measures.
1. Do a good job in the technical maintenance of the locomotive before the operation to ensure that the technical condition is good.
Checking the tire pressure with high or insufficient air pressure will increase the running resistance and increase the stress loss.
The tightening screw is determined to increase, for example, the screw loosening between the engine mount and the gearbox.
Cleaning the air filter If the air filter cross section is blocked by a third, the curvature of consumption increases by 1.7%.
Adjust the fuel advance angle such as the 195 diesel fuel supply advance angle of 16-20, with the adjustment washer between the increase and decrease sleeve pump and the gear chamber cover to ensure. The angle of advance is small, the burning of firewood is incomplete, and the consumption of pomelo is increased.
Adjusting the valve clearance The valve clearance is large or small, which will affect the aeration volume. If the valve clearance is too large, the fuel consumption will increase by 15-20%.
2, full load operation. For example, the traction of a small tractor is about 300 kilograms. When the resistance of the traction implement is roughly within this range, the maximum effective power of the engine is high, the unit productivity is high, and the consumption of the sleeve is low.
3, according to soil moisture, timely operation. All kinds of soils have corresponding humidity ranges with relatively low resistance. At this time, the most suitable cultivated land is, and the consumption of mu is also low.
4, reasonable operation, correct operation. In the operation, it is necessary to rationally plan land plots, rationally arrange driving routes, minimize shunting air traffic and change time, and stop parking without any reason. If the ploughing resistance is small and the unit speed is not allowed to be too large, a high-grade small curved door operation may be adopted. The engine water temperature is often maintained at 70-90 degrees, and start the pre-temperature, to prevent deviation, parking stall, etc., can play a fuel-efficient effect.

Pain Relief Patch
[Name] Medical Cold Patch
[Package Dimension] 6cm×8cm 4pieces/box
The pain relief patch is composed of three layers, namely, backing lining, middle gel and protective film. It is free from pharmacological, immunological or metabolic ingredients.
[Scope of Application]
For cold physiotherapy, closed soft tissue only.
[Indications]
The patches give fast acting pain relief for strains, sprains, cramp, bruises, swollen areas or joint stiffness.
[How To Use a Patch]
Please follow the Schematic Diagram. One piece, one time.
The curing effect of each piece can last for 6-8 hours.
[Attention]
Do not apply the patch on the problematic skin, such as wounds, eczema, dermatitis,or in the eyes. People allergic to herbs and the pregnant are advised not to use the medication. If swelling or irritation occurs, please stop using and if any of these effects persist or worsen.notify your doctor or pharmacist promptly. Children using the patch must be supervised by adults.
[Storage Conditions]
 Store below 30c in a dry place away from heat and direct sunlight.







Pain Relief Patch(Pain Areas)

Pain Relief Patch(Pain Areas),Shouler Pain Relief Patch,Joints Pain Relief Patch, Muscle Pain Relief Patch

Shandong XiJieYiTong International Trade Co.,Ltd. , http://www.xjplaster.com