Tractor throttle using six bogey

A repeated avoidance of the accelerator pedal before starting. Since the diesel engine has not yet rotated, the fuel injection pump has not been operated. Repeatedly stepping on the throttle will only increase the wear of the fuel injection pump control device and the oil amount adjustment mechanism, and will not allow diesel fuel to be injected into the cylinder.

The second avoids starting the throttle to the maximum position The diesel engine generally adopts the full-standard governor. When the accelerator is stepped on a certain position when starting, the fuel supply adjusting rod is at the maximum fuel supply position. If it continues to increase the throttle, The amount of oil will not change, but the larger the throttle, the higher the speed after starting. However, the temperature of the diesel engine that has just started is low and the lubrication is not enough. The immediate high-speed operation will inevitably increase the wear.

Three bogey abrupt throttle When some engine friends use the throttle, suddenly increase or decrease the throttle, which will make the engine speed increase sharply. This will increase the amount of carbon deposits in the combustion chamber, increasing wear, resulting in unstable speed and power reduction.

Four bogey consistent large throttle operation tractor in the job, should be based on changes in the load and road conditions, change the gear and change the throttle to adjust the speed. Some operators consistently use large throttles and never change the throttle position. This not only wastes fuel, but also accelerates the wear of various components.

Five avoid the throttle When the horn is used, some of the pilots like to slam the throttle, causing the exhaust pipe to emit a loud and small exhaust sound. When the horn is used to hurry. This will not only speed up machine wear, but may also cause traffic accidents due to unstable hand speeds.

6. Avoid dragging when clutch pedals are not reduced. Some of the pilots do not reduce the throttle in time when they disengage the clutch. This will cause the engine to run under the wide throttle, causing the engine speed to suddenly increase and accelerate the wear of the engine.

According to the number of barrels, Piston-typed Mobile Milking Machine can be divided into two categories: Single-barrel Type and Double barrel Type.

With unique design, easy operation, easy maintenance, it can lower the utility costs. It will not hurt the nipple by milking soft with stable vacuum. The milking cup group is with a transparent tube, so the operator can observe the nipples of cows during the milking.

After years of production and constant technological improvements, the new designed milking machines can meet the actual demand for the majority of users. We discuss and improve more about the machine, to make them catch international standards, and suitable for more users in different countries. The portable Milking Machine is not only used for the individual animal in small farm, but also provides a selection for large-scale dairy farms for some special animals.

Piston-typed Milking Machine

Piston-Typed Milking Machine,Dairy Farm Milking Machine,Piston Milking Machine,Goat Milking Machine

Zibo Maoyang Industry and Trading Co.,ltd , http://www.mysilage.com