One-Step Method Test Solution Of COVID-19 Uni-medica provides a rapid solution for screening and detecting COVID-19. It takes only 40 minutes for one round, the instruments and reagents used in this solution including sample tube, sample released reagent,PCR test reagent, PCR system.This solution doesn't need Nucleic Acid Extractor, and the results can be output on-site. One-Step Method Test Solution,Hemoglobin A1c Test Kit,one-step solution,Two-in-one Test Kit Shenzhen Uni-medica Technology Co.,Ltd , https://www.uni-medica.com
(D-3L high pressure homogenizer installation and commissioning site) 
Installation and commissioning record: US PhD brand D-3L high pressure homogenizer\NA-150 liposome extruder
Installation debug record
one. D-3L high pressure homogenizer :
1. Number of trainees: 4 (1 equipment management staff, 3 experimental staff)
2. Installation and commissioning time: 2.5 hours (responsible by professional engineers)
3. Training time: 2 hours (including the operation process, cleaning, warranty and maintenance of the equipment, use of special tools, etc.).
User hands-on operation time is 30 minutes, 10 minutes of disassembly and assembly of core components)
4. Manual: English version
5. Other equipment documents: certificate of origin, quality certificate, non-wood packaging certificate, etc.
6. Acceptance results: D-3L homogenization maximum pressure, short-term reaching 32000psi, actual operating maximum pressure: 30000psi
Flow rate: 50 ml / min, material loss after homogenization: 1 ml.
The device runs smoothly and the sound is small.
7. Equipment placement: The key laboratory is placed next to the lyophilizer to facilitate further processing of the liposomes.
8. Power source used: power supply
2. NanoAble-150 liposome extruder :
(NanoAble-150 filter extruder installation and commissioning site)
1. Number of trainees: 4 (1 equipment management staff, 3 experimental staff)
2. Installation and commissioning time: 50 minutes (responsible by professional engineers)
3. Training time: 1 hour (including the operation process of the equipment, cleaning, warranty and maintenance, use of special tools, etc.
User hands-on operation time is 20 minutes, and the core parts are disassembled for 6 minutes)
4. English manual: Yes
5. Other equipment documents: certificate of origin, quality certificate, non-wood packaging certificate, etc.
6. Acceptance results: The NA-150 extruder is subjected to a maximum pressure of 1000 psi (beyond this pressure value, a pressure relief sound is emitted),
Field test pressure: 600 psi
7. Extrusion speed: 20 ml/min, material loss after homogenization: 0.4 ml.
The device runs smoothly and has no sound.
8. Equipment placement: The key laboratory is placed within 2 meters of D-3L high-pressure homogenizer to facilitate further filtration and extrusion after liposome homogenization.
9. Power source used: bottled nitrogen