Long grass short feeding: As the saying goes: “Cut grass three knife, no material also increased.” The short forage and feed the cattle, save about 20% than the whole feed, especially in the whole feed when eating less or Hard, hard stalks that are difficult to feed can be fully utilized and their digestibility improved if they are fed short. The stalk should generally be chopped into a 3 to 5 cm feed cow.

Grassgrass feeding: Crop straws used as forage grasses, if salinization, alkalization, ammoniation treatment, or comminution and feeding of concentrates to cattle, can increase forage utilization and increase palatability, thus saving forage grass.

Less feeding Tim: Once fed, the cattle are easy to develop faults that are picky and peculiar to the forage, causing forage to be wasted. Less feed Tim, can save forage.

Feeding in the trough: To change the bad habit of feeding the fodder directly in the bullpen, feed the fodder in the trough. In this way, the forage will not be contaminated by faeces, and it will be healthy after being eaten by cattle, free from diseases, and it will also save a great deal of forage.

Crude after the first fine: first feed the roughage, the cattle will not eat food, feed more roughage. Afterwards, fine or fine forages are fed according to their nutritional needs. In this way, the utilization characteristics of cattle ruminants for roughage were fully exploited, and forage was saved.

Renovation of troughs: often due to shallow troughs, the cows get grass outside when eating, causing a lot of waste. When making food troughs, deeper ones can be avoided. Generally, the depth of the trough is about 40 cm.

Leftover grass processing: In the past, it was common for cattle to eat the remaining hard stems as fuel. If it is dried and collected, it can be crushed into grass powder with a pulverizer, and then fed, it can be effectively used.

Save grass mats: To keep the pens clean and hygienic, try to use abandoned weeds as grass mats to reduce forage grass waste.

Look at the cows to graze: When many cattle-raising families feed cattle, they just leave the grass in the trough. In this way, when the cattle graze the grass outside the tank, they can't feed the grass after they are stepped on. Therefore, the breeder should try to guard the cattle to eat the grass and then leave and find that the forage is landed. This saves a lot of hay.

Laser Distance Sensor

Leading Laser Measure Module Factory in China
The World's First single transmitting single receiving design laser module, which has a big help to reduce producing cost and power consumption of the laser distance sensor.
This Laser distance sensor has high Accuracy up to ±1 mm, working as phase measure, which support RS232/RS422/RS485/Arduino to TTL communication.
This laser distance module is widely used in the Laser Distance Meter industry, also a very good choice for the Industrial applications. Most of measuring tools manufactures is purchasing from us in China.

Product Specifications:

Range Sensor,Laser Distance Module,Distance Sensor,Laser Measure Sensor

Chengdu JRT Meter Technology Co., Ltd , https://www.cdlaserdistancesensor.com