Rollators Walkers,Adult Rollators,Lightweight Rollator,Elderly Rollators Walkers Jiangyin Huashi Medical Equipment Co.,Ltd , https://www.medicalwellcare.com I believe that many industries will have some problems when using vibrating screens. The technicians of Xinxiang Jinhe Machinery Co., Ltd. below explain the common faults, causes and treatment methods of vibrating screens. Fault: poor screening quality  Reason: The sieve hole of the screen is clogged, the number of fragments entering the sieve increases, the moisture of the sieve material increases, the feeding is uneven, the material layer is too thick, and the sieve mesh is not tight.  Treatment method: reduce the vibration screen load, change the angle of the screen frame, adjust the feeding, reduce the feeding, and tighten the screen. Fault: The vibrating screen that works normally turns slowly   Reason: drive belt loose  Treatment method: tighten the drive belt
Fault: bearing heat  Cause: Bearing lacks lubricant, bearing blockage, bearing wear  Treatment method: inject lubricant into the bearing, clean the bearing, check the replacement seal, replace the bearing
Fault: Vibrating  Cause: Poor installation or weight drop on the flywheel  Treatment method: reconfigure, balance the vibrating screen
Fault: transverse vibration of the screen frame  Reason: The eccentricity is different in size   Treatment method: adjust the flywheel
Fault: Sudden stop    Cause: The multi-slot seal is stuck   Treatment method: parking inspection, adjustment and replacement
Fault: An abnormal sound is emitted during work  Cause: The bearing is worn, the screen is not pulled tightly, the bearing fixing screws are loose, and the spring is damaged. Treatment: update the bearing, tighten the screen, tighten the screw, replace the spring
Fault: large swing during operation  Reason: uneven tension on the suspension frame and wire rope  Treatment method: adjust the wire rope to achieve uniform force