Laser cutters are the most widely used machinery for most manufacturers. Laser cutting is the use of precise high-energy density, laser beam as a method of heating and cutting laser cutting materials. Compared with other material cutting processes, laser cutting is characterized by high cutting speed and high quality. In general, it summarizes the following advantages: The cutting effect is good (the cutting speed is fast, because the laser spot is small and the energy density is high, it is because of these sayings that the cutting is better and the cutting quality is better.) The laser cutting slit is narrow, the slits are parallel on both sides and perpendicular to the surface, and the dimensional accuracy of the cut parts is high; the micro parts and the difficult parts with complicated shapes can be processed. Solved this problem in the original processing method. The cutting surface is smooth and beautiful, and can even be used as a processing step after the Zui, without mechanical processing, the parts can be used directly; thus the product processing technology has been well optimized. After laser cutting, the heat affected zone has a small width, the performance of the material near the slit is almost unaffected, and the workpiece has small deformation and high cutting precision; the product quality is greatly improved. The cutting speed is fast, the high cutting speed of Zui can reach 6-9m/min; the production efficiency is more than ten times of the original processing method. Non-contact cutting, no contact between the nozzle and the workpiece during laser cutting, no tool wear; the cost is also reduced. As mentioned above, laser cutting technology not only improves production efficiency and product quality, but also saves material and processing costs; overcomes unnecessary waste of material resources in the original cutting processing method. Thank you very much for supporting the advantages of laser cutting I made this time, and will bring more papers on laser cutting in the future! Wound Care Products used for wound production Wound Dressingwound Dressing,Types Of Wound Dressin,Surgical Wound Dressing,Wound Dressing Articles Zhejiang Lanhine Medical Products Ltd. , https://www.lanheyiliao.com