Double chamber vacuum packaging machine price? How much is the double chamber vacuum packaging machine? How much is Shandong double chamber vacuum packaging machine?

Shandong Zhucheng double chamber vacuum packaging machine Which is better? What should I pay attention to when using the double chamber vacuum packaging machine?

Today, Zhucheng Jiali Xiaobian will introduce to you: the special considerations for the double chamber vacuum packaging machine.

Please be careful not to pump water, oil, or powdery items, which can easily cause damage to the machine.

1. Turn on the power, turn on the power switch, and the indicator light is on. Set the time relay to adjust the pumping,

Heat sealing time (the first two digits represent the vacuuming time: 28 means 28 seconds. The last two digits represent the sealing time: as 12 means 1.2 seconds).

Vacuuming and heat sealing time can be adjusted at time relay: “+ one”. (Partial time relay is adjusted by the knob, the specific configuration is subject to the actual object)

2. The on-board button switch adjusts the heating temperature, the button switch is divided into 3 files, select HIGH for high temperature, LOW for low,

The ref is not heated. (The dual-chamber model is divided into four levels)

3. When debugging, pay attention to the vacuuming time is shortened by long length. When the vacuum gauge reaches a 0. 1MPa, it can be extended by 1-2 S.

The heating time should be set short and slowly lengthened. It is best to choose the low N file first.

4. When operating, listen to the vacuum pump for abnormal noise, and complete all debugging work before entering the cycle to run production.

5. Open the bag of the package and put the package into the work room. The seal should be placed flat on the silicone rubber strip.

Do not overlap the bags. Turn over the bag and press the bag to press the mouth of the bag.

6. (or press the edge of the cover) press down on the studio, close the cover, the machine will actively complete the vacuum packaging process according to the program and open the cover actively.

Some equipment is equipped with an emergency stop switch.

7. Open the vacuum cover and take out the package to complete a work cycle.

8. When you are finished working, turn off the power switch and unplug the power cord.

The above article is about the specific considerations of the double chamber vacuum packaging machine, and how to properly operate the double chamber vacuum packaging machine.