The disc dryer is an efficient conductive continuous drying equipment. Its unique structure and working principle determine its high thermal efficiency, low energy consumption, small footprint, simple configuration, convenient operation control and good operating environment. It is widely used in chemical, pharmaceutical, pesticide, food, feed and agriculture. Drying operations in industries such as by-product processing.

Maintenance and maintenance of the disc dryer
1. When the machine operation is finished, please turn the temperature adjustment knob to 0 degree to reduce the improper start and extend the life of the solenoid valve.

2, the drying temperature should be set according to the drying conditions of the clothing itself, so as not to shrink the clothes.

3. If some dry cleaning clothes are to be dried, the residual agent on the clothes must be completely evaporated and put into the machine.

4. The cotton filter screen (lower door) must be cleaned before use every day. If the filter is clogged, the air volume will decrease, which will result in slow drying, drying and waste of energy.

5. The toner (black) on the gas stove must be cleaned every week to prevent inhalation of the drum and contamination of the clothes.

6. Regularly remove the damp on the temperature sensing rod. When the temperature difference between the temperature adjustment and the thermometer is found to be too large, generally +5 degrees, one may be that the temperature sensing rod is not placed well, and the second may be the cotton wool on the temperature sensing rod.

7. The time setting of the cold "timer" is usually about 1/4 of the "hot" timing.

8. The exhaust pipe and elbow must be cleaned once a month. If it is not cleaned, the drying time will be lengthened, and too many cotton batt will be blocked, which may cause fire.

9. The bearing housing must be buttered every month to ensure the lubricity of the bearing.