Feeding site design Alpacas The alpaca should face south and be built in a dry, sunny position. In order to ensure the air circulation in the house, the alpacas can be designed as an open structure with walls on one side and one open side to facilitate fresh air supply and summer ventilation. Because the alpaca is a cold-resistant animal, its temperature is suitable between 20-25 °C, its dense fluff can resist the cold weather, and it will produce stress for hot weather. The area of ​​the alpacas depends on the size of the breeding area. Generally, each alpaca is designed in an area of ​​20 square meters, and the area of ​​the playground is generally 4 to 5 times the area of ​​the alpaca. Fence The fence should be able to prevent other animals from attacking and escape from the alpacas. The material used to build the fence can be steel pipes or other solid materials. The height of the fence should be between 2.5-3 meters, and the spacing of each steel pipe should be about 10 centimeters. Meadow To breed alpacas with high quality fluff, you should also prepare a fertile, clean grassland to facilitate the alpaca to have a free eating space and activity space. Sand bath In alpaca farming, there is a special place that is the sand bath. The sand bath is the nature of the alpacas. Through the sand bath, the alpacas can effectively clean off the debris that is stuck on the body. Under normal circumstances, a sand bath can be set up where sunlight can reach the farm. The size of the site can be determined based on the number of alpacas. Pay attention to paving the sand so that the alpaca can move better. pet /ps Electronics Blister Tray Electronics Blister Tray Electronics Blister Tray,Printed Electronics Packaging,Electronic Component Packaging,Consumer Electronics Packaging taicang hexiang packaging material co.,ltd , https://www.medpackhexiang.com